Chromatography Column Tools
Optimize Technologies EXP Trap Cartridge, 4.6mm x 5mm, 3.0µm EXP, SAX, 3pk
The Hand-Tight EXP™ Trap Column is rated to 20,000+ psi. This unique design connects directly to any injection valve (with 10-32 threads) or in-line with 1/16” tubing for unparalleled convenience and efficiency. The EXP™ System enables chemists to quickly remove detergents or salts which can affect the ionization process in MS work. This trapping technique can concentrate the sample directly on-line, allowing for increased recovery of precious sample material compared to off-line techniques. Free-Turn™ architecture allows users to change cartridges by hand without breaking fluid connections on the holder inlet/outlet. The EXP™ Trap Column family now offers packed beds available in 2, 5, 10, 15, 20 and 30mm lengths with diameters ranging from 1-4.6mm and bed volumes from 1.6-600µL. Please contact your representative directly if you're interested in a length other than 5mm.
Analytical Sales & Services Terry Tool Rotary Stainless Steel Tubing Cutter For 1/16" OD Tubing
Terry Tool Rotary Stainless Steel Tubing Cutter, Each/1.
Perkin Elmer US LLC Alumina Injector, 0.80 mm I.D., for Avio
This Alumina Injector is for use with Avio 200/500 ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
DSI LLC Tightening Tool for PEEK hex-head, 1/32" nuts, green
Tightening Tool for PEEK hex-head, 1/32" nuts, green
Electron Microscopy Sciences ESD Vacuum Straight needle with 6mm cup
For use with the EMS EDS vacuum tool.
Mac-Mod Avantor Partisil & Partisphere Wrenchless WVS End Fitting Kit
Accessories for HPLC Columns, Avantor Partisil and Avantor Partisphere
Optimize Technologies EXP2 Stem Filter Replacement Cartridge, 0.2 µm, 5pk
The EXP™2 Stem Filter features a choice of frit porosities integrated with our patented auto-adjusting stem for repeated ZDV connections with any 10-32 port. The slim architecture allows the product to easily fit into crowded instrument compartments, tightly-spaced injection ports and anywhere else an extra level of protection against clogging and contamination is necessary. The EXP™2 Stem Filter is an ideal solution to protect expensive UHPLC columns, injectors, autosamplers and MS electrospray tips without extra-column effects. When tightened by hand, the stem filter seals to 8,700+ psi. The reusable holder hardware also incorporates wrench flats to enable flawless sealing to 20,000+ psi (1,400+ bar). This product also incorporates the Optimize integral ferrule design so that the ferrule is fixed into the front end of the holder preventing frustration and wasted time searching for tiny lost ferrules. For use with EXP™2 Stem Holder only: part number 15-02-03996.